Rajpura
Bapror Road, Rajpura,
Punjab, India
Tinplate · TMBP · PPGI/PPGL · GP · GL
Coated flat steel,
Coated flat steel,
cut and finished
to your spec.
Surbhi Packers processes coated and coil steel — profiling, slitting, cut-to-length, tinplate coating and decorative printing — turning mill coil into the exact gauge, width and finish your production line runs on.
Authorised JSW Channel Service Partner
ETP / DR-8Tinplate
TMBPBlack Plate
PPGIPre-Painted GI
PPGLPre-Painted GL
GPGalvanized
Material Range
Five coated steel families, one supply line.
Every coil enters as raw substrate and leaves matched to your gauge, temper and finish requirements — ready for the can line, roofing press or fabrication shop.
Tinplate
Electrolytic Tinplate (ETP)Cold-rolled steel base with a uniform electrolytic tin coating on both faces — corrosion-resistant, solderable and food-contact safe. Stocked in SR and DR variants, bright/stone/matte finish.
ThicknessSR 0.18–0.60 mm · DR 0.14–0.24 mm
Width650 – 1250 mm
TemperT1–T5 (HR30T 49–65) · DR7.5–DR9 (71–75)
Tin coating0.56 – 16.8 gsm
Ref. standardIS 1993
TMBP
Tin Mill Black PlateCold-rolled, batch- or continuously-annealed base steel supplied ahead of tinning, chrome or lacquer coating — the same base line as ETP, for converters who apply their own coating downstream.
ThicknessSR 0.18–0.60 mm · DR 0.14–0.24 mm
Width650 – 1250 mm
TemperT1–T5 · DR7.5–DR9
SurfaceBright / Matte
Ref. standardIS 513 (Part 1)
PPGI / PPGL
Pre-Painted Galvanized / GalvalumeAluminium-zinc coated coil with a baked paint system for colour and weatherability — Roll-formed into roofing, cladding and panel stock.
Thickness0.3 – 1.20 mm
Width600 – 1335 mm
Al-Zn coating70 – 200 gsm
Zn coating80 – 275 gsm
HardnessHRB 55–65 (CQ), 85+ (Grade 80)
Ref. standardIS 14246 (PPGI) / IS 15965 (PPGL)
GP
Galvanized Plain (Hot-Dip GI)Hot-dip zinc coated steel, no paint layer — cathodic protection at cuts and scratches. Glossy uniform spangle finish, for fabrication, ducting, racking and roll-forming.
Thickness0.20 – 3.00 mm
Width900 – 1500 mm
Ref. standardIS 277
GL
Galvalume (55% Al-Zn-Si)Steel coated with a 55% aluminium / 43.4% zinc / 1.6% silicon alloy — higher heat and corrosion resistance than standard galvanize. Stocked for long-life roofing, solar structures and HVAC.
Thicknessup to 3.0 mm
Coating massAZ150 / AZ180 / AZ210
Ref. standardIS 15961
Not sure which grade?
Send us your application, we'll spec the coil.
Tell us the end product, environment and forming process — we'll recommend substrate, coating and gauge, and quote against your drawing or sample.
Contact Us
Processing Capability
What we do to the coil before it reaches you.
Each service can run standalone or in sequence — raw coil in, finished-to-spec strip, sheet or printed sheet out.
Profiling
Roll-forming coil into defined structural or panel profiles for roofing, cladding and section applications.
→Slitting
Master coils slit into precise, narrower widths with clean edges, tight width tolerance and coil set control.
→Cut-To-Length
Coil cut into flat sheets at fixed lengths, holding flatness and squareness for downstream fabrication.
→Tinplate Coating
Electrolytic tin coating applied to base steel to defined coating weight for corrosion resistance and solderability.
→Decorative Printing
Multi-colour lithographic printing and varnishing on tinplate for branded cans, closures and container stock.
Location
Rajpura & Sangrur
Two plants in Punjab — positioned for supply across North India's packaging and construction belt.
Supply Form
Coil, Sheet, CTL
Material supplied as full coil, slit coil, or cut-to-length sheet, packed for direct feed into your press or line.
Reference Standards
BIS / IS Specifications
Specs quoted with reference to IS 1993, IS 513 (Pt 1), IS 277, IS 14246, IS 15961 and IS 15965 — matched to what your line already runs.
Industries
Packaging & Construction
Serving can and closure manufacturers, roofing and cladding fabricators, and general sheet metal industry.
Mill Partnership
Authorised JSW Channel Service Partner
Stock and process predominantly JSW-origin coil.
Our Plants
Two plants across Punjab.
Surbhi Packers operates plants at Rajpura and Sangrur, Punjab.
Sangrur
Sangrur,
Punjab, India
Why Surbhi Packers
One counter for material, processing and delivery.
01
Processing under one roof
Profiling, slitting, cut-to-length, tinplate coating and printing sit in the same group of companies — fewer handoffs between your enquiry and your delivery.
02
Matched to your existing spec
We quote against the gauge, temper and coating you already run — no re-qualifying your line for a new supplier's standard.
03
Straightforward material planning
Clear lead times and packing lists for coil, slit coil or CTL sheet, so incoming material lines up with your production schedule.
04
Direct line to the plant
Enquiries go to people who run the coating and slitting lines — not a call centre — for faster, more accurate answers on feasibility and timing.
Get In Touch
Tell us the coil you need, we'll quote it.
Send your gauge, width, coating and quantity — or a sample and drawing — and we'll come back with a processing plan and lead time.